Click To Call(656) 254-3220Click To Get A Free Estimate
Brick paver driveway in front of a Valrico home

A driveway that looks newer with joints filled

Paver Sealing in Valrico, FL

Call (656) 254-3220 and a local contractor will price sealing for your Valrico driveway, pool deck or walkway.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-3220

How fast can I get paver sealing in Valrico?

You can get paver sealing in Valrico, FL from a local contractor, and expect an answer within 1 business day, and usually well before then. The estimate is free, with no obligation. To get started, call (656) 254-3220.

Sealing deepens the color, holds the joint sand in place and makes dirt easier to rinse off. Picture the walk to your front door with the green gone from the corners and the color back. A driveway fights tires and oil, and a pool deck fights water and bare feet, so tell the contractor how each area is used when you ask for a free estimate.

Call (656) 254-3220

Contractors rolling and spraying sealer on a brick paver driveway in Valrico

What does a paver sealing job in Valrico include?

A full job has four parts: an inspection, a wash, fresh joint sand and the sealer. Washing leads the job, since sealer holds in place whatever is on the pavers. Want the steps explained for your own pavers? Dial (656) 254-3220.

Inspection

The contractor looks for sunken sections, failed old sealer, stains and standing water.

Washing

Algae, dirt and residue come off. Sealer put down on top simply covers them in place.

Joint sand

New sand fills the joints so the pavers stay locked and weeds have less room.

Sealer

The chosen product goes on dry pavers at the coverage its maker calls for.

How do I know my Valrico pavers need sealing?

Look for faded color, thin joints, green film in the shade or water that soaks in instead of beading. Thin joints let weeds in and let pavers drift, and fixing that costs more than a maintenance coat. To get yours looked at, call (656) 254-3220.

Which paver sealer fits a Florida home?

Neither type wins everywhere, so ask which one the contractor plans to use and why. Unilock says water-based sealer is easier to clean up, has low odor and also hardens the joint sand. Solvent-based sealer suits high shine and busy areas, and it must go on perfectly dry pavers and joints. To talk it through, call (656) 254-3220.

A Tampa Bay sealing company sorts finishes into natural, wet look and high gloss. It says wet look is the one customers ask for most around here, because it gives the richest color. Have the contractor show a sample of each finish when you ask for a free estimate.

Should I pick a wet look or a natural finish?

Pick wet look for deeper color and a little shine, and pick natural to stay close to the paver's own look. A Tampa Bay company says natural suits modern styles and stone. High gloss shows application mistakes more, so the contractor's skill counts. To see samples side by side, ask for a free estimate.

How often do pavers need resealing in Valrico?

Plan on three to five years, the range both Unilock and a Tampa Bay company give. Driveways in full sun lean toward three, and covered patios can reach five or more. If water soaks in instead of beading, the coat is wearing out. To have a date checked, call (656) 254-3220.

Is a thicker coat a tougher coat?

No, and more sealer can hurt. Unilock says to soak the pavers with a sprayer and then run a dry roller over them to pick up the excess, because leftover sealer causes streaks, haze and drip marks. It also says to finish in one session so layers do not stack in one spot. Be wary of any offer built on extra coats, and ask about coverage when you ask for a free estimate.

When is the right day to seal pavers near Valrico?

The right day is dry, mild and at least 60 to 90 days after new pavers were installed. Unilock says that wait lets the white film called efflorescence fade, and it can take two to three months or up to a year. Sealing early can trap it. Pavers laid more recently than that should wait, so share the install date with the contractor.

Unilock also asks for clear skies for 24 to 48 hours, a surface between 50 and 90 degrees with about 75 ideal, and the sprinklers off. Hot pavers can stain or peel. Tampa Bay summers bring daily storms, so a contractor may pick a morning or move the date. To fit a date to the forecast, ask for a free estimate.

Will sealing fix sunken pavers?

No. Sealing will not lift pavers that have sunk or pulled away from an edge. Low or loose sections have to be re-leveled before any sealer, so check whether the quote covers it. Polymeric sand is sold in different colors, and a tone near your pavers blends in better. Bring up both when you ask for a free estimate.

Surfaces

Which paver surfaces around Valrico can be sealed?

Sealing suits driveways, pool decks, patios and walkways alike. Each wears differently, so the plan follows how the area is used. To start with yours, ask for a free estimate.

Driveways

A driveway carries tires, oil drips and the longest hours of sun. Sealing keeps the color even and the joints packed so the pavers stay put under a parked car.

Pool decks and lanais

Pool decks are wet most of the day, and humidity feeds algae near the water. Sealing here should leave a surface that drains and still grips bare feet.

Patios

A shaded patio stays damp, so green film starts early and hangs on. Sealing on a patio goes after those damp corners first.

Walkways and entries

A walkway is narrow, close to the mulch and easy to stain from irrigation overspray. Sealing at the front door is the first thing a guest sees.

Common problems

What paver problems are common in Valrico?

Five problems show up again and again: fading, green film, washed out joint sand, sprinkler marks and cloudy old sealer. Not sure which of these apply to you? Dial (656) 254-3220.

1. Color fading in strong sun

Tampa Bay sun carries intense UV, and a Tampa Bay sealing company lists it as the main cause of fading. An open driveway fades first, and a new coat brings the depth back.

2. Green film in damp corners

Humid air and shade keep pool decks and north walks wet. Algae grows there and the surface turns slick, so it is cleaned off before any sealer goes down.

3. Joint sand washed out by summer rain

Heavy summer rain pulls sand from between the pavers. With the sand gone, the pavers can shift and weeds move in, so the joints are refilled first.

4. Orange and brown sprinkler marks

Irrigation that hits the same strip every morning leaves stains on edges and low walls. Those marks are treated before sealing, because sealer can make a stain easier to see.

5. Old sealer that has gone cloudy

Moisture caught under an old coat can turn it cloudy or make it lift. It has to be dealt with before a new coat, and a solvent-based coat needs the right product over it.

Pricing

What does paver sealing cost in Valrico?

A Tampa Bay company publishes $1.25 to $2.50 per square foot to clean, sand and seal, and large jobs may come in closer to $1.00. Price follows square footage first, then condition. Stains, sunken sections and old sealer to strip take more labor, and a small job may meet a minimum charge of $500 to $1,000. To turn these ranges into a number for your home, ask for a free estimate.

Not ready to seal yet? The cleaning guide covers a wash alone, and the list of places served shows coverage near Valrico.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$375 to $750
600 sq ftTwo car driveway$750 to $1,500
1,000 sq ftLarge driveway or pool deck$1,250 to $2,500
1,500 sq ftDriveway plus pool deck$1,875 to $3,750

Math based on the $1.25 to $2.50 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Paver pool deck beside a screen enclosure near Valrico
Why choose us

Why hire a local contractor to seal pavers in Valrico?

A local contractor already works under the same sun, storms and humidity your pavers take. You can ask for the price in writing and decide in your own time. To get started, call (656) 254-3220.

A contractor who works nearby

The company that looks at your pavers already drives your roads. You hear from someone who knows the neighborhoods and the weather.

The price is yours to judge

You agree on a price with the contractor directly, and you are under no obligation to accept it.

Prices you can check first

Tampa Bay companies publish what they charge per square foot. Reading that range before the first call means the first quote has something to be measured against.

You make the decision

Read what to ask a paver contractor, get the price and the product in writing and take as long as you need.

How do I get a free paver sealing estimate in Valrico?

Call or fill in the short form. Expect a call back inside 1 business day, often earlier.

Call (656) 254-3220

Free, no obligation

Fresh joint sand swept between clean sealed pavers
Photos

How do Valrico pavers look after sealing?

Freshly sealed paver driveway at a Valrico home
Sealed paver pool deck at a Valrico home
Sealed paver patio behind the home at a Valrico home
Sealed paver walkway to a front door at a Valrico home
Close view of freshly sealed pavers at a Valrico home
Paver area with one cleaned half beside a dirty half at a Valrico home
Contractor cleaning pavers at a Valrico home
Contractor sealing or sanding pavers at a Valrico home
How it works

How does the paver sealing process work in Valrico?

The paver sealing process runs in five steps, from the first look to the walk-through. For a place on the schedule, call (656) 254-3220.

1. Look over the surface

Before pricing the sealing work, the contractor walks every paver surface. They note sunken spots, stains, old sealer and where the water runs.

2. Wash it with a set pressure

A pressure washer or surface cleaner goes over the pavers at around 1,500 PSI or less, with a paver detergent for algae. The pressure stays low so the joints are not blasted empty.

3. Pack the joints with new sand

Once the surface has dried, fresh sand is swept in until the joints are full again.

4. Wait for a dry window

The surface has to be dry and the forecast clear for 24 to 48 hours. Timing follows the weather, not the calendar.

5. Finish and explain

Sealer goes on with a sprayer and a dry roller in one session. The contractor then tells you how long to stay off it and when the next coat will likely be due.

Questions

Frequently Asked Questions

What do professionals use to seal pavers?

Most use a water-based or a solvent-based sealer, applied with a sprayer and a roller. Unilock, a paver maker, calls water-based sealer easier to clean up with low odor, and solvent-based sealer the choice for high shine. Ask the contractor which one is going on your pavers.

Is it better to spray or roll paver sealer?

Unilock, a paver maker, recommends using both. The sprayer soaks the pavers evenly, and a dry roller then lifts the extra so streaks and drips do not dry in place. A contractor who uses only one tool should be able to say why.

What is the average cost to seal pavers in Florida?

A Tampa Bay company publishes $1.25 to $2.50 per square foot for a full clean, sand and seal. A 600 square foot driveway in Valrico would come to about $750 to $1,500. Small jobs may meet a minimum charge of $500 to $1,000, and repairs cost extra.

How often should pavers be resealed in Florida?

Every three to five years, which both Unilock and a Tampa Bay company give as the range. Driveways in full sun sit near three, and covered patios can reach five or more. A coat is thinning when splashed water darkens the paver instead of rolling off.

What are the downsides of sealing pavers?

The cost comes back every few years, and the wrong product can cloud or peel. Solvent-based sealer needs perfectly dry pavers and joints, so a wet stretch can push the job back. Get the brand and finish on paper before you agree.

Should I clean pavers before sealing?

Yes. Unilock says sealer traps whatever is left on the surface, and it can make stains easier to see. Algae, dirt and old residue come off first, and the pavers dry before any sealer goes on.

How long should I stay off pavers after sealing in Valrico?

Unilock says to keep foot and vehicle traffic off for up to 48 hours of dry weather and to turn the sprinklers off nearby. Valrico homes with automatic irrigation should ask the contractor which zones to shut off.

Will an afternoon storm in Valrico ruin a fresh seal?

It can, which is why contractors watch the forecast. Unilock calls for clear skies for 24 to 48 hours around the work, and Tampa Bay summers bring heavy rain. A good contractor reschedules instead of sealing damp pavers.

Can you seal a pool deck in Valrico?

Yes. Decks around pools and screened lanais get sealed all the time. Humidity feeds algae near the water, so the wash comes first. Ask which product the contractor suggests for a deck that stays wet and carries bare feet, and whether a slip resistant additive is offered.

Ready to book paver sealing in Valrico? Ask for your free estimate

Call or use the short form, and expect a reply inside 1 business day, often within hours.

Call (656) 254-3220

Free, no obligation