Click To Call(656) 254-3220Click To Get A Free Estimate

FAQ

Frequently Asked Questions

What does it cost to seal pavers in Valrico?

Expect about $1.25 to $2.50 per square foot to clean, sand and seal, which is the range a Tampa Bay company publishes. A 1,000 square foot driveway comes to roughly $1,250 to $2,500. Small jobs can hit a minimum charge of $500 to $1,000, and repairs add to the total. To price your own pavers, ask for a free estimate.

How often should I seal pavers in Florida?

Plan on every three to five years. A Tampa Bay company says driveways in full sun lean toward three, and covered patios can reach five or more. Look at the color and at whether water soaks in instead of beading. To have yours checked, call (656) 254-3220.

Is it good to seal pavers in Florida?

Yes, when the color has faded, the joints are thinning or algae keeps coming back. Sealer deepens the color, helps hold the sand and makes the surface easier to rinse. It is a repeat cost, so plan for the next coat. To see if yours are ready, ask for a free estimate.

Is there a downside to sealing pavers?

The main downside is repeating it every few years. Unilock, a paver maker, also says solvent-based sealer has to go on perfectly dry pavers and joints, so a wet week can delay the job. Ask which product the contractor plans to use. To start that talk, call (656) 254-3220.

Can a local contractor in Valrico seal my pavers soon?

A local contractor can answer inside 1 business day, often earlier, and then set a date around the weather. Sealer needs clear skies, so the date follows the forecast. To get on the list, ask for a free estimate.

What do professionals use to seal pavers?

Most use a water-based or a solvent-based sealer, applied with a sprayer and a roller. Unilock, a paver maker, calls water-based sealer easier to clean up with low odor, and solvent-based sealer the choice for high shine. Ask the contractor which one is going on your pavers.

Is it better to spray or roll paver sealer?

Unilock, a paver maker, recommends using both. The sprayer soaks the pavers evenly, and a dry roller then lifts the extra so streaks and drips do not dry in place. A contractor who uses only one tool should be able to say why.

What is the average cost to seal pavers in Florida?

A Tampa Bay company publishes $1.25 to $2.50 per square foot for a full clean, sand and seal. A 600 square foot driveway in Valrico would come to about $750 to $1,500. Small jobs may meet a minimum charge of $500 to $1,000, and repairs cost extra.

Contact Us Today for a Free Estimate

A contractor who serves your area can answer any other question.

Call (656) 254-3220

Free, no obligation