Click To Call(656) 254-3220Click To Get A Free Estimate
Sealed brick paver driveway at a home in New Tampa

Paver sealing for New Tampa homes

Paver Sealing in New Tampa, FL

From Cross Creek Boulevard to Bruce B Downs, New Tampa pavers get a free sealing estimate when you call (656) 254-3220.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-3220
Paver sealing

Fast, careful paver sealing in New Tampa

Paver sealing is available across New Tampa, from Tampa Palms to Pebble Creek and the streets along Bruce B Downs Boulevard. A contractor washes, re-sands and seals drives, lanais and pool decks, and nothing is charged for the estimate. Choose to ask for a free estimate and a reply lands within 1 business day, usually much sooner.

Maybe your pavers were never sealed after the builder left, and now the color has thinned and the joints sit low. A wash, new sand and a first coat even the surface out again. Call (656) 254-3220, say what you see, and the contractor will tell you where to start.

Call (656) 254-3220

Family relaxing by a sealed paver pool deck near New Tampa
Why hire local

Why hire a local paver sealing contractor in New Tampa?

New Tampa sits in flat country of preserves, ponds and well fields, so water and shade shape how a paver job goes. A local contractor plans for both, so ask for a free estimate to talk it through.

A visit before a price

The contractor visits your New Tampa lot at no charge and quotes before any work is agreed.

A published price range

Companies list $1.25 to $2.50 per square foot to clean, sand and seal across Tampa Bay. Use that range to check any New Tampa bid.

A first coat, spelled out

If your pavers have never been sealed, ask for a written scope that lists the wash, the sand and the sealer.

No pressure to book

You pick the date and finish and decide whether to go ahead, at your own pace.

Get Your Free Estimate in New Tampa

Tell us about your pavers in New Tampa.

Call (656) 254-3220

Free, no obligation

Paver joint sand detail on a walkway near New Tampa
Common problems

What paver problems show up most in New Tampa?

A surface nobody ever sealed

Tampa annexed New Tampa in the late 1980s, and the area grew from 7,145 people in 1990 to 26,634 in 2000. A Pasco County paver company notes that builders often do not seal pavers before handover. A Tampa Bay company adds that tannin and hard water minerals soak into unsealed pavers. A first coat is simpler when no old product is in the way, but the wash has to be thorough. Pale, chalky color and dark streaks that will not rinse off are the usual signs that a surface has gone without a coat. Pour a little water on a dry corner and watch how fast it darkens, because bare pavers drink it in.

White haze on newer pavers

Extension guidance describes efflorescence as a white film from salts in the concrete. A Pasco County paver company advises waiting 60 to 90 days after installation so it can surface before sealing. Sealer put over haze can look cloudy. If your pavers are only a few months old, the contractor may suggest a later date. Waiting costs nothing, and it keeps the first coat from looking blotchy. Ask the installer what date the pavers went in, since that sets the clock on the wait.

Green growth beside preserves and ponds

New Tampa lies beside the Lower Hillsborough Wilderness Preserve, a 16,000-acre tract with pine flatwoods and forested wetlands that includes Flatwoods Conservation Park. Extension guidance says moss and algae grow on pavers where shade is heavy and the surface stays damp. A walk on the shaded side of a lot near trees or a pond is the likeliest place. It has to be washed before any sealer goes on. Rinsing it with a hose only moves the film around, so expect the contractor to treat the surface properly. A shaded corner beside a pond is a good place to start looking.

Sand that slips away in flat country

Statewide, Florida's official soil, Myakka fine sand, is found mostly in broad flatwoods, is sand through its whole profile and lets water pass quickly. A Tampa Bay company says frequent summer storms keep pavers wet and wash out joint sand. When sand goes missing, joints open up and dirt settles into them. Fresh sand goes back after every wash, so the joints are full before sealing. Open joints also let ants in, and a full joint is harder for them to use.

Irrigation rust on drives and decks

The University of Florida notes that Florida wells mostly run high in iron, and irrigation drawn from them streaks surfaces orange. Those marks get treated ahead of the coat, since sealer would trap them. Check the pavers beside your sprinkler heads and the base of the garage door. Tell the contractor where your irrigation water comes from. Aiming the spray at the lawn instead of the pavers is the simple fix that keeps new marks away. Rust shows plainly on lighter pavers, so a pool deck is a likely spot to check.

Neighborhoods

Do Tampa Palms and Pebble Creek need different paver care?

How do Tampa Palms and Pebble Creek differ?

They can, because they grew up as different kinds of places. Tampa Palms is a mixed-use planned community north of the University of South Florida, with Tampa Palms Boulevard 120 feet wide and Interstate 75 on its eastern and northern edge. Pebble Creek is a separate residential area in unincorporated Hillsborough County with 3,448 housing units in 2020. Name your community when you ask for a free estimate, whether Tampa Palms, Pebble Creek or another.

Who runs the Pebble Creek associations?

Two master associations serve Pebble Creek, one with more than 1,100 homes and a community center, and one with just over 300 homes and no shared amenities. Ask yours about exterior finishes before you choose one, since rules can differ between associations. A written scope from the contractor makes that request easier, and the contractor can supply product details. Call (656) 254-3220 and ask what to bring to the estimate.

What does the New Tampa map include?

New Tampa covers about 24 square miles inside the city of Tampa plus a larger unincorporated area that keeps a Tampa mailing address. Its ZIP codes are 33544, 33646 and 33647, and housing includes condominiums and townhouses as well as master-planned communities. If you live in a townhouse with shared walks, the association may handle some pavers, so ask for a free estimate and say which are yours.

Pricing

What does paver sealing cost in New Tampa?

What does a first coat cost in New Tampa?

Tampa Bay companies list their work at $1.25 to $2.50 per square foot to clean, sand and seal. A first coat on pavers with no earlier sealer means no old product to sort out, but stains and low joint sand still move the figure. Large lanais and pool decks add area quickly, and a long driveway beside them adds more. To price your lanai, deck and drive, ask for a free estimate; the estimate is free.

Does a new paver set change the price?

If your pavers are new, timing affects the quote too. Installers often suggest waiting 60 to 90 days so efflorescence can surface and be cleaned, and a contractor may add a haze treatment. Pool decks and lanais are measured separately. Call (656) 254-3220 and tell the contractor when the pavers went in.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$375 to $750
600 sq ftTwo car driveway$750 to $1,500
1,000 sq ftLarge driveway or pool deck$1,250 to $2,500
1,500 sq ftDriveway plus pool deck$1,875 to $3,750

Math based on the $1.25 to $2.50 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Contractors sealing a paver driveway at a home in New Tampa
How it works

How does a paver sealing job work in New Tampa?

Check the age, the haze and any old coat

The contractor asks when your New Tampa pavers went in, since newer ones may still be showing haze. Sunken or lifted spots are repaired first, because sealer preserves any dip. If a coat exists, the product matters, since water-based sealer cannot go over solvent-based sealer. If no coat exists, the contractor still notes how porous the pavers feel, because that guides how much sealer they take. Builders often skip sealing, so many surfaces here are bare. Ask any neighbor who had the same builder, since a past sealer name saves guesswork. Keep the closing paperwork for the house handy, because it sometimes names the paver installer.

Wash off the green, the stains and the haze

Washing clears algae from shaded edges, stains and any efflorescence. Sealer should not go over stains or algae, so nothing is left to lock in. This is the longest stage on a surface that has gone years without care. Plants and screen panels near the pavers are rinsed or covered, and pool equipment is kept clear of the wash water. Where a lanai meets the deck, the contractor takes extra care with the edge. A clean surface shows the true color before the finish is chosen, so this is the moment to decide between matte and a wet look. Gates and mailboxes are kept clear of overspray.

Refill the joints with sand

The wash empties the joints, and new sand goes back in before the coat. Flat sandy ground and summer downpours thin joint sand over time. Full joints keep soil out and give weeds less room. The surface is swept clean afterward, so no loose grains sit on the finish. Full, tight joints also help the pavers hold their pattern under cars.

Let the flat ground dry

Sealer needs a dry surface, and flat ground with shaded edges can hold moisture after a storm. The wet months run from late May to early October. The contractor holds the job until a clear stretch comes along. A damp joint under a dry-looking surface is the reason for that patience. Sealing over trapped moisture is a mistake that tends to show up weeks later as a cloudy patch.

Seal in the finish you chose

Sealer goes on in your finish, matte or wet look, and a wet look shows scuffs sooner. Quotes often cover a span of two to five years per coat. In Riverview, one company asks for about 24 hours before walking and 48 before parking. Ask what applies to your job. Pets, bikes and water from the sprinkler timer all need to stay off until the contractor says the coat has set.

Services

Complete paver services in New Tampa

In what order does the New Tampa job run?

A New Tampa job runs in a set order: wash, dry, re-sand and seal. On a surface that has never been sealed, the wash does the most visible work, and sealer goes on last. That order keeps dirt from being trapped underneath. To hear how long each stage takes on your lot, call (656) 254-3220.

Which surfaces get sealed in New Tampa?

New Tampa homes tend to mix driveways, lanais and pool decks. Sun fades an open driveway, shade near a pond or preserve grows green, and a pool deck sees splash and bare feet. Tell the contractor which surfaces you have, then ask for a free estimate, and the estimate can price each one.

How do you pick between matte and wet look?

Pick the sealer by asking two questions. Is there already a coat, and do you want matte or a wet look? Water-based cannot go over solvent-based, and a wet look shows scuffs sooner, so matte is the quieter choice. Call (656) 254-3220 and ask which finish suits your New Tampa home.

How do afternoon storms set the date?

From late May to early October, sea breeze storms roll in most afternoons across New Tampa. Sealer needs a dry surface, so the contractor waits for a clear stretch. Flat ground and shaded edges can hold moisture, which may add a day. For a date that suits your lot, ask for a free estimate.

Questions to ask before you hire

  • How do you find out how many square feet my driveway and lanai really are?
  • Can I see the sealer's product label before you start?
  • Will you cover my plants, my screen enclosure and the garage door?
  • How soon after sealing can the sprinklers run and the cars park on the driveway?
  • Will the pool deck stay slip resistant after it is sealed?
  • What should I do before you arrive, such as moving cars and patio furniture?
  • Do you charge extra if some pavers have sunk or shifted?
Photos

What do sealed pavers look like around New Tampa?

Freshly sealed paver driveway near New Tampa
Sealed paver pool deck near New Tampa
Sealed paver patio behind the home near New Tampa
Sealed paver walkway to a front door near New Tampa
Close view of freshly sealed pavers near New Tampa
Paver area with one cleaned half beside a dirty half near New Tampa
Contractor cleaning pavers near New Tampa
Contractor sealing or sanding pavers near New Tampa
Contractor talking through a paver sealing estimate with a homeowner in New Tampa
Local

Why local matters in New Tampa

Why do New Tampa associations matter?

A contractor who works New Tampa knows the area spans city and county, with many separate associations. That matters when a finish needs approval. Someone from outside may not ask which association applies. To reach a contractor who works the Bruce B Downs corridor, call (656) 254-3220.

What does the Morris Bridge well field have to do with it?

Local knowledge also covers water. Flatwoods Conservation Park holds the Morris Bridge well field, which supplies the Tampa Bay region with an average of 8 million gallons of water per day. A contractor who works here keeps an eye on where the ground stays wet. You can ask for a free estimate and ask where your sprinkler water comes from and how that affects the job.

How do the roads shape a visit?

Getting around matters too. Bruce B Downs Boulevard and Interstate 75 run through the area, and a contractor who knows the roads can plan a visit that fits your schedule, which saves you a long wait at home. To book the free estimate, ask for a free estimate.

Local roots

What should I know about New Tampa before I hire a contractor?

How did New Tampa come to be?

New Tampa is a 24-square-mile area inside the city of Tampa, plus a larger unincorporated area that keeps a Tampa mailing address. It was first settled in the mid-19th century but stayed largely undeveloped until Tampa annexed it in the late 1980s. Pebble Creek is described as the oldest neighborhood, and Tampa Palms as the oldest area inside the city limits. If you live in either, call (656) 254-3220.

Which parks and libraries sit in New Tampa?

The New Tampa Regional Library on Cross Creek Boulevard is a 25,000-square-foot building, and New Tampa Nature Park has wooded trails. Flatwoods Conservation Park is part of the Lower Hillsborough Wilderness Preserve, which covers 16,000 acres and 13 miles of the Hillsborough River. If you live close to any of these spots, ask for a free estimate and give the street.

Questions

Frequently Asked Questions

What is the average cost to seal pavers in New Tampa?

Across Tampa Bay the published range is $1.25 to $2.50 per square foot to clean, sand and seal. Stains, low joint sand and an old coat move a New Tampa job inside that range. Ask that the quote show total square feet and list the wash, the sand and the sealer on separate lines.

Is there a downside to sealing pavers in New Tampa?

A few. Sealer wears over time and needs a fresh coat, a wet look shows scuffs more readily than matte, and a rainy week can push a date back. You may also need your association's approval for some finishes. Many owners accept those tradeoffs for a cleaner, more even surface.

How much does it cost to seal outdoor pavers like a lanai or pool deck in New Tampa?

The same published range of $1.25 to $2.50 per square foot applies to clean, sand and seal. Lanais and pool decks are measured on their own, so they add to the total. Ask the contractor to list each area and its square feet. That makes the quote easy to compare against the published range.

What should be cleaned off pavers before sealing in New Tampa?

Algae, stains, tannin, rust and any white haze should come off first. A Tampa Bay company says sealer should not go over stains or algae. The contractor picks a cleaner to match what is on your surface, and rinse water is kept away from plants and screen panels. Ask which product will be used if anything beside the pavers is delicate. A written scope that names the cleaner makes later comparison easy.

How soon after installation can new pavers in New Tampa be sealed?

A Pasco County paver company advises waiting 60 to 90 days so efflorescence can surface and be cleaned off. Builders often do not seal before handover. Ask your contractor to check for haze before picking a date. A quick look at the surface in dry weather often tells the story.

Do I need HOA approval to seal pavers in Tampa Palms or Pebble Creek?

Check with your association first. Pebble Creek has two master associations, and rules can differ between them. A written scope from the contractor, including the finish, makes any approval request simpler. Keep the reply with your job paperwork. Townhouse and condo owners should also ask who maintains the shared walks.

Why do pavers near a preserve turn green so quickly?

Extension guidance says moss and algae grow on pavers where shade is heavy and the surface stays damp. Lots near trees, ponds and wooded preserves can have both. The green has to be washed off before sealing. Trimming back overhanging branches, where you are allowed to, also lets the surface dry faster. Raking leaves off the walk before a storm helps too.

How long should I stay off newly sealed pavers in New Tampa?

In Riverview, one paver company tells customers to allow 24 hours for foot traffic and 48 for vehicles on most jobs. Sealer type and weather change that, so get the exact wait in writing. Driveways in New Tampa are often the main parking spot, so plan the two days ahead of time. Let the household and any visitors know, so nobody tracks across it.

Ready for a Free Estimate in New Tampa?

Call (656) 254-3220 and tell us about your pavers.

Call (656) 254-3220

Free, no obligation